ALIF2002T -Sender. KVM over IP System der Referenzklasse, überträgt DualLink DVI (2560x1600@60Hz) oder DualHead (2x) FullHD DVI-D (und 1920x1200, 8/16/24Bit), USB2.0 (HID und fullspeed/lowspeed), RS-232, bidirektional Stereo Audio über nur eine (oder zwei) CATx per TCP/IP. 100m Point-2-Point, skalierbar im Netzwerk. Diese Extender können als Punkt-zu-Punkt, Punkt-zu-Multipunkt (Multicast) oder als komplette virtuelle Matrix eingerichtet werden. Benötigt wird dazu ein AIM bzw. ASP-001 (ADDERLink Infinity Manager), sowie ein GigabitSwitch (managed, Systemvoraussetzung erfragen bitte). Benötigt Empfänger. Option Glasfaser SFP.
Beschreibung
IP-basiert: Standard-IP-Protokolle, die maximale Kompatibilität mit Ihrer bestehenden IT-Infrastruktur und den Fähigkeiten Ihrer Mitarbeiter gewährleisten
Weitere Daten
Perfect digital video: uncompressed video extension and pixel perfect digital video up to 24 bits per color at a maximum of 1920x1200 over 60Hz with real time control
Digital Stereo Audio: digitally delivered crystal clear audio across the network
Distribution: of DVI-D, USB, audio and bidirectional RS232 across up to 10km
Power redundancy: the units can detect whether the network is in operation and will utilize the second network port is failure detected
EDID management: Extended Display Identification Data (EDID) enables the remote system to exactly mirror the date coming from the source monitor
Plug and Play: the ADDERLink INFINITY range is delivered in a zero config state so they work as soon as they are connected, without the need for drivers or software
Robust yet lightweight: small form factor, rack mountable device
USB True Emulation: USB 2.0 enables connection to any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers
Video resolution
The system supports either two Single Link DVI-D resolutions to a maximum of 1920 x 1200 @60Hz or one Dual Link to a maximum of 2560 x 1600 @60Hz.
Audio
The system transfers analog stereo audio (Line In/Line Out) via digital signalling between any transmitter/receiver pair.
Audio output of any transmitter can be multicast to many receivers.
Supports USB2.0 devices (low, full and high speed). Security feature allows the blocking of non HID devices. Isochronous devices are not supported (e.g. USB audio or video devices).
Cable Requirements
CATx (up to 100m/330ft) or fiber (requirements dependent)
Environmental
0 to 40 deg C / 32 to 104 deg F
Connectors - Local Unit
DVI-D x 2, Audio 3.5mm in, Audio 3.5mm out, USB type B, RS232 9 pin D-Type, SFP slot
Mechanical
1U compact case, robust metal construction. 198mm/7.92" (w), 44mm/1.76" (h), 150mm/6" (d), 1.1kg/2.7lbs.
Power
2.5mm DC jack (power adapter included),100-240VAC 50/60Hz, 0.4A, input to power adapter, 5VDC 12.5W output from power adapter
Software
All known operating systems
