Sensor, 230V AC 1W-UNI, Spannungs- Sensor 100-230VAC. Elektrisch isoliert, Hutschienenmontage. Der 1-Wire UNI (RJ11) Ausgang kann mit Ares, Poseidon2, STE2 und anderen Geräten verbunden werden..
Beschreibung
100-240V AC Sensor
1-Wire UNI output for connection to Poseidon2 and HWg-Ares units
Accuracy 5%
Resolution 1V
Measuring period approximately 1s
1-Wire electrically isolated from the mains part
Designed for installation on a DIN rail (2-modules wide)
Mechanical dimensions 88 x 64 x 37 mm
Applications and usage:
Monitoring of mains voltage fluctuations.
Mains voltage monitoring over a long period.
Detection of mains voltage presence.
Monitoring of power supply at the input or the output of a UPS.
Weitere Daten
Sensor 230V AC 1W-UNI is designed for 100 to 250V AC mains voltage measurement. It provides readings in Volts and is powered using the 1-Wire UNI bus (RJ11).
The sensor fits on a DIN rail.
Measured input voltage is electrically isolated from the output.
Supports both 110V/60Hz and 230V/50Hz.
Two RJ11 ports allow daisy-chaining.
Measuring voltage over a LAN (110/230V SNMP)
Measuring voltage over a LAN (110/230V SNMP)
The sensor measures input voltage of an UPS – rated 230V AC (110V/60Hz also supported).
The voltage sensor is connected to a Poseidon2 3266 remote monitoring LAN unit over the 1-Wire UNI (RJ11) bus.
Sensor 230V AC 1W-UNI is powered from the 1-Wire UNI (RJ11) bus. More sensors can be daisy-chained using the second RJ11 output.
Operating environment:
-30°C – 85°C / 0%RH – 100%RH
Storage environment:
-30°C – 60°C / 5%RH – 95%RH
Dimensions:
94 x 64 x 37 (WxHxD) / 114g
Warranty:
24 months
